Bespoke jaw geometries, ISO-certified serialization, custom retail packaging, and bilateral NDAs signed before anyone opens your CAD. We manufacture to your brand, our paperwork, and a tolerance we both sign.
Milling tolerance held across 14 five-axis centers
Countries shipped to
DFM report turnaround
Most private-label programmes combine three or four of these. Tell us which matter and we will quote the combination, not a menu.
50 µm spot size on surgical-grade surfaces, annealed below the surface so the mark survives more than 1,500 autoclave cycles. GS1 DataMatrix, FDA UDI, CE marks, and your logo in one pass.
English cross-hatch from 0.6 to 1.2 mm depth, American smooth barrels, or golf-ball dimple bands. Grip geometry is tuned to the clinician hand you specify.
AISI 410, 420B, 440A/C, or Ti-6Al-4V with TiN gold and black, DLC, or PVD hardcoat up to 2,800 HV. Every coat is checked against ASTM F899 chemistry.
Custom bevels, tungsten-carbide brazed inserts, micro-fine tips down to 0.12 mm, and curved or bayonet shanks drawn to your master model.
Tyvek and PET peel pouches, Euro-hang retail blisters, and foam-fitted rigid magnet boxes, assembled in an ISO 7 cleanroom and validated to EN 285.
We accept STEP, IGES, DXF, DWG, or a dimensioned drawing. Within 48 hours you get a DFM report flagging anything that will not mill cleanly and the cheapest route to your tolerance.
Fixtures, EDM electrodes, and a first-article sample. You approve the golden sample physically — we will courier it by DHL anywhere in the world before committing to a production batch.
Spectrometry, vacuum hardening, artisan finishing, passivation, and optical comparator inspection on 100% of parts. Full dossier with your lot reference.
Private-label packaging, UDI serialization, COO, FDA listing support, and CIF or FOB documentation. We ship from Karachi or air-direct out of Lahore.
Every submission is read by a tooling engineer, not a sales queue. You get a feasibility view within 24 hours and a DFM report within 48.
Six years of private-label extraction forceps and we have never had a field complaint about passivation. The dossier arrives with the shipment, which is what makes our own audits boring — in the best way.
Our first pilot was 40 pieces of a braid cutter we could not get anyone else to quote below $40 each. They came back with a redesign at 240 pieces and it has been our volume line ever since.
What convinced our legal team was the IP handling: NDA before drawings, segregated tooling, and our name on nothing they did not approve. Two years later nobody has asked for a file back.
Send one drawing. We will tell you whether we can hold your tolerance in production, what it costs at 250 and 5,000 pieces, and how long the tooling takes.